Log in or Register for enhanced features | Forgotten Password?
White Papers | Suppliers | Events | Report Store | Companies | Dining Club | Videos

Energy Business Review
Return to: EBR Home | Oil & Gas | Exploration & Development | Suppliers Listing

Subsea Innovation Ltd - Innovative Subsea Engineering White Papers

Subsea Innovation Ltd - Innovative Subsea Engineering

SISeal™ Passive J-Tube Seals The SISeal™ ROV Passive J-Tube Seal provides a lower cost alternative to the ROV-activated J-Tube Seal.
View white paper
SIStop™ Waterstop Seals The SIStop™ Pipe-In-Pipe Waterstop Seal provides a field proven solution for isolating a section of flooded annulus by preventing water passage to the adjacent Pipe-In- Pipe sections during installation and normal operation.
View white paper
SIGrip™ Pipeline Connectors The SIGrip™ Flanged Connector can be diver or ROV installed and used for permanent subsea applications.
View white paper
SIGrip™ Structural Repair Clamps The SIGrip™ Pipeline Repair Clamp is available for either diver installed or remote ROV installed applications.
View white paper
Tether Management Systems TMS-SF The TMS-SF (Self Fleeting) is compatible with all Subsea Innovation Launch and Recovery Systems as well as a variety of other LARS and ROV systems.
View white paper
Tether Management Systems TMS-PF The TMS-PF (Power Fleeting) is compatible with all Subsea Innovation Launch and Recovery Systems as well as a variety of other LARS and ROV systems.
View white paper
Stack Reinforcement Systems The purpose of the equipment is to reinforce the subsea annular cavity in a flare stack.
View white paper
SISeal™ ROV Activated J-Tube Seals The SISeal™ ROV installed J-Tube Seal provides a field proven solution for providing a permanent seal between an existing j-tube and the newly installed riser / umbilical / cable to provide an annulus which can be treated with corrosion inhibitor and maintain an over pressure.
View white paper
SISeal™ Diver Installed J-Tube Seals The SISeal™ Diver Installed J-Tube Seal provides an alternative method of installation into the j-tube.
View white paper
SIGrip™ Riser Hang-Off Clamps The purpose of a Riser Hang-Off System is to provide a structural support between the riser or umbilical and the outer J-tube.
View white paper
SIGrip™ Pipeline Recovery Clamps Subsea Innovation have an extensive track record in supplying a wide range of Pipeline Recovery Clamps specifically to suit clients’ individual project requirements.
View white paper
SIClamp™ ROV Installed Clamps The Subsea Innovation ROV Installed Clamps are field proven having been installed on many subsea pipelines.
View white paper
Moon Pool Systems Subsea Innovation have produced 6 Multi Purpose Handling Systems (MPHS) for use with a wide variety of subsea tools.
View white paper
Model XX-90 LARS The XX-90 LARS is the standard Subsea Innovation LARS for the trencher market.
View white paper
Model XWM-90 LARS The XWM-90 LARS is a standard Subsea Innovation LARS. Generally the construction of the hydraulically controlled swing frame complete with self fleeting sheave wheel ensures the umbilical is not damaged during high loadings in deep waters.
View white paper
Model XW-90 LARS The XW-90 LARS is the standard Subsea Innovation LARS. Over 50 systems are in operation worldwide.
View white paper
Model XT-90 LARS The XT-90 LARS was developed by Subsea Innovation to be easily road transportable within the USA.
View white paper
Model XS-90 LARS The XS-90 LARS was developed by Subsea Innovation to be easily road transported throughout the world. The build is similar to the XW-90 LARS however the width is increased to 6.2m.
View white paper
Model HFM-135 LARS The HFM-135 LARS was developed by Subsea Innovation to give a greater outreach and to allow the boom to reach the horizontal position.
View white paper
Model HF-135 LARS The HF-135 LARS was developed by Subsea Innovation to give a greater outreach and to allow the boom to reach the horizontal position.
View white paper
Model FT-90 LARS The FT-90 LARS was developed by Subsea Innovation to meet the requirements for light weight ROVs. The base frame is strengthened to avoid the need for large sea-fastening or expensive modifications to vessel decks.
View white paper
J-Tube Seal Installation Tool ABB were facing a problematic subsea project whereby two of another supplier’s passive J-Tube Seals had become detached from the j-tube following pressurisation.
View white paper
Insulation and Foil Application Tools Subsea Innovation were approached by Technip to design a machine that could apply insulation panels to their pipe in pipe systems. The machines were to be installed in the spoolbases in Alabama USA and Dande Africa.
View white paper
Emergency Pull-off Connectors Subsea Innovation have developed a system for protecting subsea tools and templates from potential damage caused by vessel DP run-off (dynamic positioning).
View white paper